Workshop Overhead Travelling Crane

10 Ton LD Single Workshop Remote Control Overhead Travelling Crane

Product Description

10 Ton LD Single Workshop Remote Control Overhead Travelling Crane commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge.

In our heavy lifting work, 10 Ton LD Single Workshop Remote Control Overhead Travelling Crane is one of our herculists, the equipment has a strong bearing capacity, can meet people's requirements for the transport of large quantities of goods. The use of electric single beam crane to transport heavy loads greatly reduces the amount of human labor.

Maintenance

• Maintenance of 10 Ton LD Single Workshop Remote Control Overhead Travelling Crane: the motor provides power for the vehicle, and its performance directly determines the vehicle's dynamic performance, that is, the vehicle's carrying capacity, so the maintenance and maintenance of the motor is crucial. In the daily use process, the electric single beam crane generator should be inspected once a week (in summer) or once every two weeks (in winter).
• Maintenance of crane charger: the parameter setting of the charger will directly affect the performance of the motor. Please charge the vehicle with a regular charger.
• Maintenance of traction motor: traction motor is an important power executive component in vehicle operation, which needs to be maintained on time according to regulations
• Electrical maintenance of 10 Ton LD Single Workshop Remote Control Overhead Travelling Crane: 1.Regularly check whether the connection of each power line is fastened; 2.Regularly check whether there is adhesion between relay and contactor contacts; 3.Regularly check the wear condition of the vehicle conductive device.
• Mechanical maintenance of 10 Ton LD Single Workshop Remote Control Overhead Travelling Crane: 1.Gear oil in the reducer box of flat car should be replaced regularly; 2.The oil and grease in the pole bearing pedestal must be replenished regularly and in sufficient quantities; 3.The motor and reducer drive are driven by belt. Check whether the belt is loose frequently during use. If it is loose, it can adjust the tension belt of adjusting bolt of motor base. If it is adjusted to a larger position and loose, the transmission belt needs to be replaced.

Prevention of Abnormal Situation

• 10 Ton LD Single Workshop Remote Control Overhead Travelling Crane in use, in order to prevent derailment, flat cart speed should not be too fast, to ensure that the parking, the operator and operator can stand;
• In order to ensure that the electric single-beam crane does not roll over, the materials and heavy objects should be stacked evenly during transportation;
• 10 Ton LD Single Workshop Remote Control Overhead Travelling Crane shall not exceed the limit or exceed the personnel when transporting materials. It is prohibited to pile up all kinds of materials on both sides of the flat car track.

Parts Of Crane

double girder crane

workstation bridge crane

Workshop Overhead Travelling Crane Images